SEL SP-44

active protection system for electric circuit and ground


DESCRIPTION
The device is a technical mean for active information protection for the top-secret category objects.
SEL SP-44 prevents information leakage through the powersupply and ground lines providing a masking noise there in the frequency range of 0.01 - 400 MHz. It also suppresses wiretaps which are using these lines as a data-transmitting channel.
Advantages:
• Doesn’t influence PC performance and consumer electronics functioning.
• Two independent uncorrelated noise generators for the low and high frequency bands for the circuits "phase" - "earth" and "zero" - "earth" allows to eliminate the possibility of informative signal
interception for the anti-phase and in-phase connection schemes.
• During operation the unit constantly performs a self-test, and in case of failure gives sound and light signal.

SPECIFICATIONS
Noise frequency range - 0.01 - 400 MHz
Lines protected - power supply, ground
Quantity of independent noise signal channels (for phase-to-ground and zero-to-ground circuits) - 2
Noise quality factor - not less than 0,9
Independent noise level adjustment range in the frequency bands, not less than:
    0.01 - 0.5 MHz - 20 dB
    5 - 400 MHz - 20 dB
Noise actuation control - manual, wired remote control, RS-485
Power supply - 220 V ± 10% 50 Hz
Dimensions - 172x172x42 mm
Weight not more than - 1.1 kg

Address:

Office 155, Block A, Techno Hub 1,
Dubai Silicon Oasis, Dubai, UAE
P.O. Box 341142

Phone:

+971 4 3413 155

E-mail:

info@asme-fze.ae

Web page was created with Mobirise